ASSE Category: Standards

BOOK TITLE, ORDER NUMBER, AND SCOPE	LIST PRICE	ORDER
Slips and Trips Compendium Hard Copy: # STP408 Electronic Copy: # E_STP408 Slips, trips and falls due to preventable conditions continue to occur in workplaces across the country. To reverse this trend, ASSE and ASTM decided to select slip, trip and fall prevention standards from their own catalogues that in combination would best help employers reduce and ultimately eliminate these incidents.	$19.99	(Hard Copy) (Electronic Copy)
Prevention through Design: an ASSE Technical Report TR-Z790.001-2009 Hard Copy: # TRZ790_001_2009 Electronic Copy: # E_TRZ790_001_2009 This Technical Report provides guidance on including prevention through design concepts and processes as a specifically identified element in a safety and health management system so that decisions pertaining to occupational risks are incorporated into the design and redesign processes, including consideration of the life cycle of facilities, materials, and equipment. The Technical Report complements but is not intended to replace existing specific standards and procedures, but rather to support those that meet the performance objectives defined in this document or other standards.	$19.99	(Hard Copy) (Electronic Copy)
A10 Construction Safety Standards Package Hard Copy: # A10Set Electronic Copy: # E_A10Set 5 Standards 1 price! A10.6-2006: Safety & Health Program Requirements for Demolition Operations A10.7-1998 (R2005): Safety Requirements for Transportation, Storage, Handling & Use of Commercial Explosives & Blasting Agents A10.8-2001: Safety Requirements for Scaffolding A10.12-1998 (R2005): Safety Requirements for Excavation A10.13-2001: Safety Requirements for Steel Erection	$199.95	(Hard Copy) (Electronic Copy)
A10 Crane Safety Standards Package Hard Copy: # A10CS Electronic Copy: # E_A10CS 5 Standards 1 price! A10.8: Safety Requirements for Scaffolding A10.28: Safety Requirements for Work Platforms Suspended from Cranes or Derricks A10.31: Safety Requirements, Definitions & Specifications for Digger Derricks A10.33: Safety & Health Program Requirements for Multi-Employer Projects A10.42: Safety Requirements for Rigging Qualifications & Responsibilities	$199.95	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.3-2006 Safety Requirements for Powder-Actuated Fastening Systems - American National Hard Copy: # A10_3_2006 Electronic Copy: # E_A10_3_2006 This standard provides safety requirements for a powder-actuated fastening system (tool or machine) that propels a stud, pin, fastener, or other object for the purpose of affixing it, by penetration, to hard structural material.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.4 - 2007 Safety Requirements for Personnel Hoists & Employee Elevators Hard Copy: # A10_4_2007 Electronic Copy: # E_A10_4_2007 This standard applies to the design, construction, installation, operation, inspection, testing, maintenance, alterations and repair of hoists and elevators that (1) are not an integral part of buildings, (2) are installed inside or outside buildings or structures during construction, alteration, demolition or operations and (3) are used to raise and lower workers and other personnel connected with or related to the structure. These personnel hoists and employee elevators may also be used for transporting materials under specific circumstances defined in this standard.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.5-2006 Safety Requirements for Material Hoists Hard Copy: # A10_5_2006 Electronic Copy: # E_A10_5_2006 This standard applies to material hoists used to raise or lower materials during construction, alteration or demolition. It is not applicable to the tem-porary use of permanently installed person-nel elevators as material hoists.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.6-2006 Safety and Health Program Requirements for Demolition Operations Hard Copy: # A10_6_2006 Electronic Copy: # E_A10_6_2006 This standard applies to the demolition of buildings and other structures. This standard is intended to be complete in itself, except that any device, equipment and activity incidental to demolition operations shall be conducted, installed, inspected, maintained and operated in accordance with the require-ments in American National Standards for Safety in Construction and Demolition Operations A10 Series, other American National Standards listed in Section 2 and other appropriate standards.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.7-1998(R2005) Safety Requirements for Transportation, Storage, Handling and Use of Commercial Explosives and Blasting Agents Hard Copy: # A10_7_1998 Electronic Copy: # E_A10_7_1998 Provides the construction industry with reasonable minimum recommendations for establishing and maintaining a level of health and safety with regard to the transportation, storage, handling, and use of commercial explosives and blasting agents.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.8-2001 Safety Requirements for Scaffolding Hard Copy: # A10_8_2001 Electronic Copy: # E_A10_8_2001 The scope of the standard addresses the establishment of safety requirements for the construction, operation, maintenance, and use of scaffolds used in the construction, alteration, demolition, and maintenance of buildings and structures. The standard does not cover permanently installed suspended scaffold systems or aerial platforms. The purpose of the standard is to provide reasonable safety for life and limb of those engaged in occupations requiring the use of scaffolding. There is one significant exception to the standard. In cases of practical difficulties, unnecessary hardships, or new developments, exceptions to the literal requirements may permit the use of other devices or methods, but only when it is clearly indicated by a qualified person that the equivalent protection is thereby secured.	$95.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.9 1997 (R2004) Safety Requirements for Masonry and Concrete Work Hard Copy: # A10_9_1997 Electronic Copy: # E_A10_9_1997 Establishes safety requirements pertaining to concrete construction and masonry work in construction.	$69.00	(Hard Copy) (Electronic Copy)
ANSI A10.10 - 1998 (R2004) Safety Requirements for Temporary & Portable Space Heating Devices Hard Copy: # A10_10_1989 Electronic Copy: # E_A10_10_1989 Provides minimum safety requirements for the selection, installation, operation and maintenance of space heating devices and equipment of temporary and portable design.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.11 - 1989 (R1998) Safety Requirements for Personnel and Debris Nets Hard Copy: # A10_11_1989 Electronic Copy: # E_A10_11_1989 Establishes safety requirements for the selection, installation, and use of personnel and debris nets during construction, repair, and demolition operations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.12-1998 (R2005) Safety Requirements for Excavation Hard Copy: # A10_12_1998 Electronic Copy: # E_A10_12_1998 Establishes standards for the prevention of deaths, injuries and damage during or related to excavation operations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.13-2001 Safety Requirements for Steel Erection Hard Copy: # A10_13_2001 Electronic Copy: # E_A10_13_2001 This standard establishes safety requirements for the erecting, handling, fitting, fastening, reinforcing and dismantling of structural steel, plate steel, steel joist, and metal deck at a final in-place field site during construction, maintenance and dismantling operations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.15-1995 (R2005) Safety Requirements for Dredging Hard Copy: # A10_15_2005 Electronic Copy: # E_A10_15_2005 This standard applies to the operation, inspection, and maintenance of any vessel fitted with machinery for the purpose of removing or relocating of material from or in a body of water.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.16-2009 Safety Requirements for Tunnels, Shafts and Caissons Hard Copy: # A10_16_2009 Electronic Copy: # E_A10_16_2009 This standard establishes safety requirements pertaining to the construction of tunnels, shafts, and caissons. The requirements set forth in this standard cover environmental control; related facilities; fire prevention; hoisting; haulage; and electrical drilling and blasting, and compressed-air work. This standard is not intended for application to mining or quarrying operations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.16-2009 Safety Requirements for Tunnels, Shafts and Caissons and Comparison Document Hard Copy: # A10_16CPKG Electronic Copy: # E_A10_16CPKG This special combo package contains an important comparison document, highlighting differences between the 2009 and 1995 versions of the standard. The A10.16 standard establishes safety requirements pertaining to the construction of tunnels, shafts, and caissons. The requirements set forth in this standard cover environmental control; related facilities; fire prevention; hoisting; haulage; and electrical, drilling and blasting, and compressed air work. This standard is not intended for application to mining or quarrying operations.	$83.99	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.17-2006 Safe Operating Practices for Hot Mix Asphalt (HMA) Construction Hard Copy: # A10_17_2006 Electronic Copy: # E_A10_17_2006 This standard establishes safety requirements pertaining to the construction of tunnels, shafts, and caissons. The requirements set forth in this standard cover environmental control; related facilities; fire prevention; hoisting; haulage; and electrical drilling and blasting, and compressed-air work. This standard is not intended for application to mining or quarrying operations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.18-2007 Safety Requirements for Temporary Roof and Floor Holes, Wall Openings, Stairways and Other Unprotected Edges Hard Copy: # A10_18_2007 Electronic Copy: # E_A10_18_2007 This standard prescribes rules and establishes safety requirements for the protection of employees and the public from hazards arising out of or associate with temporary floor holes and wall openings, stairs and other unprotected edges including low slope roofs during, construction and demolition activities.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.19-2008 Safety Requirements for Pile Installation and Extraction Operations Hard Copy: # A10_19_2008 Electronic Copy: # E_A10_19_2008 This standard establishes safety requirements for the installation and extraction of piles during construction and demolition operations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.20-2006 Safe Operating Practices for Tile, Terrazzo, and Marble Work Hard Copy: # A10_20_2006 Electronic Copy: # E_A10_20_2006 This standard establishes safety requirements for construction operations and equipment used in the handling and installation of ceramic tile, terrazzo, and marble. The types of construction are not listed. The standard is intended to apply to buildings of all kinds and to heavy construction, such as work in tunnels.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.22-2007 Safety Requirements for Rope Hard Copy: # A10_22_2007 Electronic Copy: # E_A10_22_2007 Establishes minimum safety requirements for temporary personnel hoisting systems used for the transportation of persons to and from working elevations during normal construction and demolition operations, including maintenance, and is restricted to use in special situations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.24-2006 Roofing Safety Requirements for Low-Sloped Roofs Hard Copy: # A10_24_2006 Electronic Copy: # E_A10_24_2006 This standard establishes safe operating practices for the installation, maintenance and removal of membrane roofing that is seamed or seamless on low-sloped roofs with a maximum slope of 4 and 12. These types of roofs include but are not neccessarily limited to: hot and cold built-up roofing, single-ply roofing, polyurethane foam (PUF) roofing, liquid-type roofing (Hypalon, polyurethane, etc.), modified bitumens.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.25-2009 Sanitation in Construction Hard Copy: # A10_25_2009 Electronic Copy: # E_A10_25_2009 This standard establishes practices for sanitation construction and demolition operations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.27-1998 (R2005) Safety Requirements for Hot Mix Asphalt Facilities Hard Copy: # A10_27_1998 Electronic Copy: # E_A10_27_1998 Provides recommendations concerning the design, manufacture, operating processes, and equipment associated with the production of hot asphalt mixing (HMA) facilities.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.28-1998 (R2004) Safety Requirements for Work Platforms Suspended from Cranes or Derricks Hard Copy: # A10_28_1998 Electronic Copy: # E_A10_28_1998 Applies to platforms suspended from the load lines of cranes or derricks in order to (1) perform work at elevations that cannot normally be reached by other types of scaffolds or aerial work platforms or (2) transport personnel to elevations where other means of access are unsafe or impractical because of design or worksite conditions.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.31-2006 Safety Requirements, Definitions and Specifications for Digger Derricks Hard Copy: # A10_31_2006 Electronic Copy: # E_A10_31_2006 This standard applies to special multipurpose vehicle-mounted machines, commonly known as digger-derricks. These machines are primarily designed to accommodate components which did holes, set poles, and position materials and apparatus. Excluded from this standard are general-purpose cranes designed only for lifting service and machines primarily designed on for digging holes. This standard establishes requirements for specifications and dimensions. It defines the respective responsibilities of the manufacturer, distributor, installer, owner, user, and operator of the digger-derrick. The requirements this standard shall be met or exceeded.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.32-2004 Fall Protection Systems for Construction and Demolitions Hard Copy: # A10_32_2004 Electronic Copy: # E_A10_32_2004 This standard establishes performance criteria for personal fall protection equipment and systems in construction and demolition and provides guidelines, recommendations for their use and inspection. It includes, but is not limited to; fall arrest, restraint, positioning, climbing, descending, rescue, escape and training activities. Exceptions: This standard does not include lineman?s body belts, pole straps, window washers belts, chest/waist harnesses, and sports equipment.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.33-1998 (R2004) Safety and Health Program Requirements for Multi-Employer Projects Hard Copy: # A10_33_1998 Electronic Copy: # E_A10_33_1998 Sets forth the minimum elements and activities of a program that defines the duties and responsibilities of construction project where a single Project Constructor supervises and controls the project.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.34-2001 (R2005) Protection of the Public on or Adjacent to Construction Sites Hard Copy: # A10_34_2001 Electronic Copy: # E_A10_34_2001 Standards relating to the protection of employees and the public from hazards arising out of, or associated with, construction and demolition operations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.37-1996 Debris Net Systems Used During Construction and Demolition Operations Hard Copy: # A10_37_1996 Electronic Copy: # E_A10_37_1996 Establishes safety requirements for the design, selection, installation, and use of debris net systems during construction, demolition operations and for the temporary containment of debris from deteriorating structures.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.38-2000 R2007 Basic Elements of an Employer's Program to Provide a Safe and Healthful Work Environment Hard Copy: # A10_38_2000_R2007 Electronic Copy: # E_A10_38_2000_R2007 This Standard Establishes the Minimum Elements of a program for protecting the safety and health of employees involved in construction and demolition activities.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.39-1996(R2005) Construction Safety and Health Audit Program Hard Copy: # A10_39_1996 Electronic Copy: # E_A10_39_1996 This Standard Establishes the Minimum Elements of an auditing program for protecting the safety and health of employees involved in construction and demolition activities.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.40 - 2007 Reduction of Musculoskeletal Problems in Construction and Demolition Operations Hard Copy: # A10_40_2007 Electronic Copy: # E_A10_40_2007 This standard applies to construction work where there may be risk factors, which could lead to musculoskeletal problems for construction workers, but it does not apply to office or administrative work performed by contruction companies.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.42-2000 Safety Requirements for Rigging Qualifications and Responsibilities Hard Copy: # A10_42_2000 Electronic Copy: # E_A10_42_2000 This standard establishes minimum criteria of knowledge and performance requirements for a qualified rigger in the construction industry. It is designed to assist in achieving reasonable safety of all persons and materials during the process of or as the result of rigging, lifting, or movement of loads.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.44-2006 Control of Energy Sources (Lockout/Tagout) for Construction and Demolition Operations Hard Copy: # A10_44_2006 Electronic Copy: # E_A10_44_2006 This standard establishes the minimum requirements for the control to prevent release of energy sources that could cause injury or illness to personnel performing construction and demolition work.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.46-2007 Hearing Loss Prevention for Construction and Demolition Workers Hard Copy: # A10_46_2007 Electronic Copy: # E_A10_46_2007 Establishes criteria for hearing loss prevention programs to be used for construction and demolition operations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A10.47-2009 Work Zone Safety for Highway Construction Hard Copy: # A10_47_2009 Electronic Copy: # E_A10_47_2009 This standard covers workers engaged in construction, utility work, maintenance, or repair activities on any area of a highway.	$69.00	(Hard Copy) (Electronic Copy)
ANSI A1264.1-2007 Safety Requirements for Workplace Walking/Working Surfaces and Their Access Hard Copy: # A1264_1_2007 Electronic Copy: # E_A1264_1_2007 This standard sets forth safety requirements for areas where danger exists of persons or objects falling through floor or wall openings, platforms, runways, ramps, and fixed stairs, in normal, temporary, and emergency conditions. This standard applies to industrial and workplace situations and is not intended to apply to construction, residential, or commercial occupancies except where necessary maintenance or work station access may be required. Recognizing that the special safety requirements necessary for stages, orchestra pits, churches, school auditoriums, and athletic assembly occupancies may not be adequately covered by other codes or standards, this one may provide the minimum safety performance requirements to protect the occupants.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE A1264.2-2006 Standard for the Provision of Slip Resistance on Walking/Working Surfaces Hard Copy: # A1264_2_2006 Electronic Copy: # E_A1264_2_2006 This standard sets forth provisions for protecting persons where there is potential for slips and falls as a result of surface characteristics or conditions.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z15.1-2006 Safe Practices for Motor Vehicle Operations Hard Copy: # Z15_1_2006 Electronic Copy: # E_Z15_1_2006 This standard sets forth practices for the safe operation of motor vehicles owned or operated by organizations.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z117.1-2009 Safety Requirements for Confined Spaces Hard Copy: # Z117_1_2009 Electronic Copy: # E_Z117_1_2009 This revised standard provides minimum safety requirements to be followed while entering, exiting, and working in confined spaces at normal atmospheric pressure, but does not pertain to underground mining, tunneling, caisson work or other similar tasks that have established national consensus standards. This is a performance-oriented standard and, as such, is not intended to replace existing specific standards and procedures. Rather, it is intended to support those that meet the performance objectives defined in this standard. (Two appendices, including logic diagram for determination of confined spaces and references)	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z359.1- 2007 Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components Hard Copy: # Z359_1_2007 Electronic Copy: # E_Z359_1_2007 Fall Protection equipment and systems for climbing, man-riding, work positioning, fall arrest systems, rescue and evacuation and other fall hazard operations, excluding construction/demolition and sports activities.	$125.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z359.2- 2007 Minimum Requirements for a Comprehensive Managed Fall Protection Program Hard Copy: # Z359_2_2007 Electronic Copy: # E_Z359_2_2007 Establishes guidelines and requirements for an employer’s managed fall protection program, including policies, duties and training, fall protection procedures, eliminating and controlling fall hazards, rescue procedures, incident investigations and evaluating program effectiveness.	$125.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z359.3- 2007 Safety Requirements for Positioning and Travel Restraint Systems Hard Copy: # Z359_3_2007 Electronic Copy: # E_Z359_3_2007 This standard establishes requirements for the performance, design, marking, qualification, test methods, and instructions of lanyards and harnesses comprising personal positioning and travel restraint systems.?	$125.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z359.4- 2007 SSafety Requirements for Assisted-Rescue and Self-Rescue Systems, Subsystems and Components Hard Copy: # Z359_4_2007 Electronic Copy: # E_Z359_4_2007 This standard establishes requirements for the performance, design, marking, qualification, instruction, training, use, maintenance and removal from service of connectors, harnesses, lanyards, anchorage connectors, winches / hoists, descent control devices, rope tackle blocks, and self-retracting lanyards with integral rescue capability comprising rescue systems, utilized in pre-planned self-rescue and assisted-rescue applications for 1-2 persons.?	$125.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z359.6-2009 Safety Design Requirement for Active Fall Protection Hard Copy: # Z359_6_2009 Electronic Copy: # E_Z359_6_2009 This standard sets forth Safety Design Requirements and Specifications for Personal Fall Arrest Systems (PFAS)	$125.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z359.12-2009 Connecting Components for Personal Fall Arrest Systems Hard Copy: # Z359_12_2009 Electronic Copy: # E_Z359_12_2009 This standard sets forth Safety Requirements for Connecting Components for Personal Fall Arrest Systems (PFAS) Connectors	$125.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z359.13-2009 Energy Absorbers and Energy Absorbing Lanyards Hard Copy: # Z359_13_2009 Electronic Copy: # E_Z359_13_2009 This standard sets forth Safety Requirements for Lanyards and Energy Absorbers for Personal Fall Arrest Systems (PFAS)	$125.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z390.1-2006 Accepted Practices for Hydrogen Sulfide (H2S) Training Programs Hard Copy: # Z390_1_2006 Electronic Copy: # E_Z390_1_2006 This standard sets forth accepted practices for hydrogen sulfide (H2S) safety training and instruction of affected personnel to include, but not be limited to, the following:	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z490.1-2001 Criteria for Accepted Practices in Safety, Health, and Environmental Training Hard Copy: # Z490_1_2001 Electronic Copy: # E_Z490_1_2001 This standard establishes criteria for safety, health, and environmental training programs, including development, delivery, evaluation and program management.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z590.2-2003 Criteria for Establishing the Scope and Functions of the Professional Safety Position Hard Copy: # Z590_2_2003 Electronic Copy: # E_Z590_2_2003 This standard (Z590.2) sets forth common and reasonable parameters of the professional safety position. The standard will help businesses and industry in identifying areas of responsibility for their in-house practitioners of safety and outside safety consultants.	$69.00	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z117.1-2009 Standard and the Z117 Comparison Document Hard Copy: # Z117_1_2009CPKG Electronic Copy: # E_Z117_1_2009CPKG This "COMBO" package includes the Z117 Comparison Document, outlining changes and differences between the Z117-1995, 2003 and 2009 versions. It also includes: The Z117.1-2009 revised standard provides minimum safety requirements to be followed while entering, exiting, and working in confined spaces at normal atmospheric pressure, but it does not pertain to underground mining, tunneling, caisson work or other similar tasks that have established national consensus standards. This is a performance-oriented standard and, as such, is not intended to replace existing specific standards and procedures. Rather, it is intended to support those that meet the performance objectives defined in this standard.	$83.99	(Hard Copy) (Electronic Copy)
ANSI/ASSE Z359 Fall Protection Code Package Verion 2.0 Hard Copy: # Z359_2009CODE2 Electronic Copy: # E_Z359_2009CODE2 ANSI/ASSE Z359.0-2007: Definitions and Nomenclature Used for Fall Protection and Fall Arrest ANSI/ASSE Z359.1-2007: Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components ANSI/ASSE Z359.2-2007: Minimum Requirements for a Comprehensive Managed Fall Protection Program ANSI/ASSE Z359.3-2007: Safety Requirements for Positioning and Travel Restraint Systems ANSI/ASSE Z359.4-2007: Safety Requirements for Assisted-Rescue and Self-Rescue Systems, Subsystems and Components ANSI/ASSE Z359.1-1992 (R1999)—Historical Document ANSI/ASSE Z359.6-2009: Safety Requirements for Fall Arresters for Personal Fall Arrest Systems (PFAS) ANSI/ASSE Z359.12-2009: Connecting Components for Personal Fall Arrest Systems ANSI/ASSE Z359.13-2009: Personal Energy Absorbers and Energy Absorbing Lanyards	$459.00	(Hard Copy) (Electronic Copy)