Sizing up the solution

Best Manufacturing prides itself on providing solutions for its customers. So when the company tested a new glove that exceeded the technical requirements of one of the nation’s leading automakers, they were puzzled when employees failed to adopt the glove. The solution was all about glove size.


One of the country’s leading automakers was having wear and laundering cycle issues with the general purpose work glove it was using. Best Manufacturing was in the final stages of developing its new super absorbent glove, called Zorb-IT®, which stands up to repeated washings with no shrinkage and no de-lamination.

Working with the procurement supervisor at one of the automaker’s midwestern plants, Best introduced the Zorb-It® glove for testing. The Zorb-It® glove outperformed the competitor’s glove by three to one on wear, but more important, its durability in the laundry was significantly better — only 13 percent of the Zorb-It® gloves had to be scrapped in the laundry versus 65 percent of the competitor’s gloves.

But at a second plant the same gloves were rejected by employees, with little explanation. Plant safety and purchasing managers simply told Best the employees claimed they couldn’t do their jobs with the Zorb-It® gloves. Obviously puzzled at how a glove that was superior on paper could fail in real-world testing, Best asked to speak directly with the employees on the floor to learn why they weren’t using the gloves.

Size matters

What they learned is that size is just as important — if not more important — to employees as performance and other features. A glove that doesn’t fit or is uncomfortable to wear is a glove that won’t be used, no matter how technically superior it may be.

After talking to employees on the plant floor, Best discovered there was a slight variation in glove size between the gloves employees had been using and the new Best glove. Though most glove manufacturers follow the European (CE) standard for sizing, slight variations do exist from manufacturer to manufacturer, even among gloves that meet the same technical specifications. For example, employees who had worn a medium in the competitor’s glove found that a medium in the Zorb-It® was too large.

Once employees were individually sized and fitted, their adoption of the Zorb-It® glove increased and they raved about its performance. For the automaker, there’s a financial benefit, too. Best estimates the switch will save its customer approximately $94,000 in the first year by reducing the number of gloves that must be replaced due to wear and laundering issues.

To overcome confusion and help employees find the right size, Best has developed signage encouraging employees to “Size Down for Safety.” The posters placed throughout the plant also explain the gloves’ color coding system, which differs slightly from the previous glove employees had used.

The bottom line: many opportunities to solve safety issues are missed because the person ultimately using the glove isn’t fitted correctly. At the very least, when a new glove is introduced, management should take the time to make sure the glove being tested is the same size as the one currently being used by employees. By taking a more active role in fitting employees for gloves and offering an appropriate range of sizes, safety and purchasing managers can help ensure glove use and compliance with safety standards.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.



Image Galleries

Scenes from the World of Safety

Sights, signs & symbols from the National Safety Congress & Expo held in San Diego, CA, September 15-18

4/14/15 2:00 pm EDT

RISK-BASED SAFETY MANAGEMENT SYSTEM: Key Components for Applying Risk Tools to EHS Efforts

Join us for this webinar as we discuss how you can make effective use of risk analysis and risk management technology to guide efforts within your organization. We will distinguish between risk analysis and risk management; and identify some of the software tools that will help proactively identify, document, mitigate, and prevent high-risk events. You will learn how to improve compliance, reduce risk, and cut costs in your organization using these automated tools.

ISHN Magazine


2015 March

Check out ISHN's March issue, which features articles about moisture wicking technology, toxic gas detection and fall protection.

Table Of Contents Subscribe


M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - January 2015



For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. 



Facebook logo Twitter YouTubeLinkedIn Google + icon

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.