Today's News

New ANSI standard to address how to safely harness wind energy (3/2)

Due to the growing national emphasis on green energy development and the potential risks involved in green energy-related construction operations, the American Society of Safety Engineers (ASSE) recently announced a new A10 Accredited Standards Committee (ASC) standard project to protect the safety and health of workers involved in construction and demolition operations for wind generation/turbine facilities, the “American National Standard for the Safe Construction and Demolition of Wind Generation/Turbine Facilities” (A10.21-20xx).

“The committee decided to develop this standard because of the national emphasis on green energy, recognizing that thousands of these ‘green’ structures are going to be built and as such present challenging safety and health issues,” A10 Committee Chair Richard King said in a statement. “The purpose of the new standard is to sort out the safety and health issues and provide practical solutions to constructors.”

During the January 2009 A10 ASC meeting, the committee approved the A10.21 subgroup to develop the standard. Ryan J. Jacobson, P.E., manager of wind energy services for Black & Veatch, will serve as the subgroup chair and Walter A. Jones, M.S., associate director, occupational safety and health for Laborers’ Health & Safety Fund of North America, will serve as the A10.21 liaison.

Safety and health issues of concern during construction and demolition of wind generation/turbine facilities that the A10.21 subgroup will address in the development of the standard include working at heights, mechanical assembly of large components, medium voltage electrical safety, and working in exposed environments, according to a statement released by ASSE. The subgroup will cite and recognize other existing voluntary national consensus standards in the development process.

In addition, major construction tasks in a wind project that will be considered include: wind turbine assembly and erection; civil construction (roads and pad clearing); structural construction (foundations); placement of electrical collection system (buried medium voltage lines); and substation and transmission line construction, according to ASSE. Major activities that will also be discussed include: wind turbine generator component offloading; site staging; base tower section placement, which could include anchor bolt tensioning, leveling and grouting; tower assembly; nacelle placement; rotor assembly (typically on the ground); rotor placement; and mechanical completion and commissioning.

ASSE serves as the secretariat for the A10 Accredited Standards Committee on construction and demolition operations. The A10 standards serve as guides to contractors, labor and equipment manufacturers in the construction and demolition industry.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Scenes from the World of Safety

Sights, signs & symbols from the National Safety Congress & Expo held in San Diego, CA, September 15-18

3/31/15 11:00 am EST

Changes to NFPA 70E® – What You Need to Know

NFPA ® for Electrical Safety in the Workplace is revised every three years, providing the most up-to-date requirements for safe work practices to reduce exposure to electrical hazards. This program analyzes several significant changes in 70E ® and is designed to clarify the reasoning behind the changes, and assist in determining how the changes impact employees and employers.

ISHN Magazine

ISHN0215_cover.jpg

2015 February

Check out the February issue of ISHN, which features articles about hand protection.

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - January 2015

FDO JAN 2015 COVER

 

For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. 

CHECK OUT THE JANUARY 2015 ISSUE OF FDO HERE

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.