Today's News

OSHA national emphasis program targets workplaces that release highly hazardous chemicals (7/29)

Facilities that could potentially release highly hazardous chemicals resulting in toxic fire or explosion hazards are the focus of an OSHA national emphasis program (NEP), according to an agency press release.

The program establishes policies and procedures for inspecting workplaces that are covered by OSHA's process safety management (PSM) standard.

The Chemical NEP, a one-year pilot program, outlines a new approach for compliance officers who conduct site inspections. The program’s inspection process includes asking detailed questions designed to gather facts related to PSM requirements and verifying that employers’ written and implemented PSM programs are consistent. The intent of the NEP is to conduct quick inspections at a large number of facilities that will be randomly selected from a list of worksites likely to have highly hazardous chemicals in quantities covered by the standard.

“Several catastrophic incidents have been caused by failure to comply with the requirements of the PSM standard,” said acting Assistant Secretary of Labor for OSHA Jordan Barab. “This situation has resulted in loss of workers’ lives. This national emphasis program allows OSHA inspectors to verify that employers are complying with the requirements of the PSM standard.”

During its first year, the Chemical NEP will be piloted in several regions around the country, using programmed inspections. Programmed inspections are planned and do not result from an accident, complaint or referral. In regions not covered by the pilot, the Chemical NEP will be used to inspect workplaces reporting PSM-related complaints, referrals, accidents or catastrophes, that is, unprogrammed inspections. A description is available at http://www.osha.gov/OshDoc/Directive_pdf/CPL_02_09-06.pdf.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Scenes from the World of Safety

Sights, signs & symbols from the National Safety Congress & Expo held in San Diego, CA, September 15-18

3/31/15 11:00 am EST

Changes to NFPA 70E® – What You Need to Know

NFPA ® for Electrical Safety in the Workplace is revised every three years, providing the most up-to-date requirements for safe work practices to reduce exposure to electrical hazards. This program analyzes several significant changes in 70E ® and is designed to clarify the reasoning behind the changes, and assist in determining how the changes impact employees and employers.

ISHN Magazine

ISHN0215_cover.jpg

2015 February

Check out the February issue of ISHN, which features articles about hand protection.

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - January 2015

FDO JAN 2015 COVER

 

For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. 

CHECK OUT THE JANUARY 2015 ISSUE OF FDO HERE

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.