Today's News

CSB to investigate fatal explosion at Connecticut power plant (2/8)

The U.S. Chemical Safety Board (CSB) is deploying a seven-person team to the site of a fatal explosion at the Kleen Energy Plant in Middletown, Connecticut, according to an agency press release. The team is expected on site today.

According to media reports, the explosion at approximately 11:30 a.m. resulted in multiple fatalities and injuries and caused off-site damage.

CSB lead investigator Don Holmstrom said, “The CSB’s investigative team will examine the activities that were ongoing at the time of this accident, including any gas purging, as indicated by initial media reports.”

At a public meeting on Thursday, February 4, the CSB issued urgent recommendations (http://www.csb.gov/UserFiles/file/Final_UR.pdf) that the national fuel gas codes be changed to improve safety when gas pipes are being purged - cleared of air - during maintenance or the installation of new piping. The Board’s urgent recommendations resulted from the CSB’s ongoing federal investigation into the June 9, 2009, natural gas explosion at the ConAgra Slim Jim production facility in Garner, North Carolina, which caused four deaths, three critical life-threatening burn injuries, and other injuries that sent a total of 67 people to the hospital.

The CSB issued a safety bulletin on gas purging in October 2009, because of the occurrence of multiple serious accidents during purging operations. Key safety lessons described in the bulletin included purging gases to a safe location outdoors away from ignition sources, evacuating non-essential workers during purging, using combustible gas monitors to detect any hazardous gas accumulations, and effective training for personnel involved in purging,

Mr. Holmstrom leads the CSB’s Western Regional Office located in Denver, Colorado, and led the agency’s investigation into the 2009 purging accident at the ConAgra facility in Garner, North Carolina.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Scenes from the World of Safety

Sights, signs & symbols from the National Safety Congress & Expo held in San Diego, CA, September 15-18

4/14/15 2:00 pm EDT

RISK-BASED SAFETY MANAGEMENT SYSTEM: Key Components for Applying Risk Tools to EHS Efforts

Join us for this webinar as we discuss how you can make effective use of risk analysis and risk management technology to guide efforts within your organization. We will distinguish between risk analysis and risk management; and identify some of the software tools that will help proactively identify, document, mitigate, and prevent high-risk events. You will learn how to improve compliance, reduce risk, and cut costs in your organization using these automated tools.

ISHN Magazine

ISHN0415_cover.jpg

2015 April

Check out ISHN's April issue, which features content about lockout-tagout, heat stress, hearing protection and more!

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - January 2015

FDO JAN 2015 COVER

 

For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. 

CHECK OUT THE JANUARY 2015 ISSUE OF FDO HERE

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.