Today's News

On 5th Anniversary of fatal BP Texas City explosion, CSB Chairman urges oil refineries to reflect on safety (3/24)

John Bresland, chairman of the Chemical Safety Board (CSB) issued the following press statement yesterday on the 5th anniversary of the fatal explosion at the BP Texas City refinery.

“Five years ago today, at about 1:20 p.m., a series of explosions rocked the BP Texas City refinery during the restart of a hydrocarbon isomerization unit.

“Fifteen workers were killed and 170 others were injured. Many of the victims were working in or around work trailers located near an atmospheric vent stack. The explosions occurred when a distillation tower flooded with hydrocarbons and was over- pressurized, causing a geyser-like release from the vent stack. The hydrocarbons found an ignition source and exploded.

“I urge everyone in the oil refining industry to take a moment today and think about that tragic loss of life and the severity of so many injuries which continue to afflict workers five years later.

“Today would be an appropriate time for company management to pause and personally pledge to do everything in their power to prevent this kind of catastrophic accident from happening at their refineries. And in my view it would also be appropriate for BP to recommit to safety in a way that builds on the steps it has taken in the aftermath of the Texas City tragedy.

“In the CSB’s final investigation report issued two years after the accident, we found organizational and safety deficiencies at all levels of the BP Corporation. It was the most comprehensive and detailed investigation the CSB has ever done. Our investigation team turned up extensive evidence showing a catastrophe waiting to happen: that cost-cutting had affected safety programs and critical maintenance; production pressures resulted in costly mistakes made by workers likely fatigued by working long hours; internal audits and safety studies brought problems to the attention of BP’s board in London, but they were not sufficiently acted upon. Yet the company was proud of its record on personnel safety.

“I urge everyone involved in operations and safety programs at refineries to take time to visit the CSB’s BP investigation web page, review the key findings in the report, and ask “Is any of this happening at my facility?” I also recommend taking a lunch hour to view with your colleagues the CSB Safety Video "Anatomy of a Disaster", an extensive examination — with computer animation — of the factors that caused the BP tragedy.

“Refinery accidents at other companies continue to occur with dismaying frequency. These have also taken lives, disrupted communities, and threatened the nation’s flow of gasoline and other refined oil products. These accidents will only stop when every refinery has made the financial and human commitment to sound process safety management.

“BP notes it has spent over one billion dollars repairing and improving the Texas City refinery’s equipment and operations. Media reports indicate a like amount has gone to settle lawsuits filed after the accident. This gives new meaning to the old adage, ‘If you think safety is expensive, wait until you have an accident.’

“When will we know whether the tragedy of 2005 has resulted in greater safety at BP and other companies’ refineries? Only when we can look back over the passing of a significant number of years without major accidents, deaths or injuries. In the meantime, only the highest commitment to running down the even smallest of problems and upsets will assure the prevention of so-called low probability, high-consequence events like the tragedy that took so many lives in Texas City five years ago today.”

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Scenes from the World of Safety

Sights, signs & symbols from the National Safety Congress & Expo held in San Diego, CA, September 15-18

4/14/15 2:00 pm EDT

RISK-BASED SAFETY MANAGEMENT SYSTEM: Key Components for Applying Risk Tools to EHS Efforts

Join us for this webinar as we discuss how you can make effective use of risk analysis and risk management technology to guide efforts within your organization. We will distinguish between risk analysis and risk management; and identify some of the software tools that will help proactively identify, document, mitigate, and prevent high-risk events. You will learn how to improve compliance, reduce risk, and cut costs in your organization using these automated tools.

ISHN Magazine

ISHN0415_cover.jpg

2015 April

Check out ISHN's April issue, which features content about lockout-tagout, heat stress, hearing protection and more!

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - January 2015

FDO JAN 2015 COVER

 

For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. 

CHECK OUT THE JANUARY 2015 ISSUE OF FDO HERE

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.