Today's News

OSHA proposes $266,000+ in penalties against Tucker, Ga., manufacturer following worker amputations (12/14)

December 13, 2009
/ Print / Reprints /
ShareMore
/ Text Size+

Crespac Inc. in Tucker, Ga., has been cited with 34 safety and health violations by the OSHA, according to an agency press release. Proposed penalties total $266,400.

"OSHA began its comprehensive safety and health inspection after learning of two separate incidents resulting in amputations within a 30-day period," said Gei-Thae Breezley, director of OSHA's Atlanta-East Area Office. "In both instances, management knew of deficiencies but acted with plain indifference by failing to correct the problems in a timely manner that could have prevented these amputations."

The agency is citing the company with three willful, four repeat, 19 serious and one other-than-serious safety violations, as well as five serious and two other-than-serious health violations. OSHA is proposing penalties of $249,200 for the safety violations and an additional $17,200 for the health violations.

The willful citations result from the company's failure to ensure that all machines had proper safety guards, functional emergency stop cords and usable safety interlock switches installed on machinery. A willful violation is one committed with intentional, knowing or voluntary disregard for the law's requirements, or with plain indifference to employee safety and health.

The company is being cited for repeat violations related to having slippery and wet floors, lack of safety guards on machines, machines being operated with broken parts and employees being exposed to electrical shocks.

Serious violations include fall hazards, slipping and tripping hazards, entrapment hazards, failure to provide proper fire training and equipment, failure to properly train forklift operators, electrical hazards, noise hazards, exposure to hazardous chemicals and an insufficient respirator program for employees. An OSHA violation is serious if death or serious physical harm can result from a hazard an employer knew or should have known exists. OSHA issues repeat violations when it finds a substantially similar violation of any standard, regulation, rule or order at any of a company's other facilities in federal enforcement states.

Other-than-serious violations relate to the company's failure to conduct timely inspections of overhead cranes and related equipment and recordkeeping deficiencies in required OSHA incident logs.

The company has 15 business days from receipt of the citations to comply, request an informal conference with OSHA's area director or contest the findings before the independent Occupational Safety and Health Review Commission. The site was inspected by staff from OSHA's Atlanta-East Area Office, 2183 Northlake Parkway, Building 7, Suite 110, Tucker, Ga.; telephone 770-493-6644.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Scenes from the World of Safety

Sights, signs & symbols from the National Safety Congress & Expo held in San Diego, CA, September 15-18

11/4/14 2:00 pm EST

Eye Injuries: You rarely see them coming. Practical Solutions for reducing injuries to the eye.

The 3M Eye Injury Reduction webinar will provide an examination of how to help solve eye injuries in the workplace. This issue continues to challenge virtually every industry, and the solution is often times multifaceted. 3M will share some new tools and approaches to help you in solving this issue.

ISHN Magazine

ISHN JAN 2015 COVER

2015 January

Check out ISHN's first issue of 2015, which features articles about hearing protection as well as the State of the EHS Nation 2015 Survey.

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - January 2015

FDO JAN 2015 COVER

 

For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. 

CHECK OUT THE JANUARY 2015 ISSUE OF FDO HERE

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.