Today's News

OSHA fines Rexnord Industries LLC $130,500 after worker's arm was amputated (7/20)

OSHA has cited Rexnord Industries LLC with $130,500 in proposed penalties for violating federal workplace safety standards after a mechanical power press operator, removing parts from a parts dumper, had her arm amputated when the machine unexpectedly began to operate.

As a result of a January 2010 inspection, OSHA has issued Rexnord one willful, six serious and one repeat citation. The willful citation, with a proposed penalty of $70,000, is for failing to provide proper guarding on the mechanical power presses to prevent an amputation. A willful violation is one committed with intentional, knowing or voluntary disregard for the law's requirement, or plain indifference to employee safety and health.

Some of the six serious citations, with proposed penalties of $25,500, include failing to provide proper machine guarding and to conduct regular, periodic and weekly inspections of mechanical power presses and electrical hazards. An OSHA violation is serious if death or serious physical harm can result from a hazard an employer knew or should have known exists.

The company also received a $35,000 proposed fine for a repeat violation because it failed to provide proper protection to its employees working on metal cutting band saws and lathes. A repeat violation is issued when an employer previously was cited for the same or similar violation of any standard, regulation, rule or order at any other facilities in federal enforcement states within the last three years.

"There is no excuse for a company to disregard the safety and welfare of its workers by not following OSHA safety standards," said OSHA Area Director George Yoksas in Milwaukee. "Those who ignore safe practices and OSHA regulations are inviting tragedy into the lives of their workers."

The company, which manufactures transmissions and conveying equipment, employs more than 5,300 workers at 22 facilities in the United States.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Scenes from the World of Safety

Sights, signs & symbols from the National Safety Congress & Expo held in San Diego, CA, September 15-18

3/31/15 11:00 am EST

Changes to NFPA 70E® – What You Need to Know

NFPA ® for Electrical Safety in the Workplace is revised every three years, providing the most up-to-date requirements for safe work practices to reduce exposure to electrical hazards. This program analyzes several significant changes in 70E ® and is designed to clarify the reasoning behind the changes, and assist in determining how the changes impact employees and employers.

ISHN Magazine

ISHN0315_cover.jpg

2015 March

Check out ISHN's March issue, which features articles about moisture wicking technology, toxic gas detection and fall protection.

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - January 2015

FDO JAN 2015 COVER

 

For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. 

CHECK OUT THE JANUARY 2015 ISSUE OF FDO HERE

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.