Vendor News & Case Studies

Workrite sets standard in garment safety with NFPA 2112 certifications and external labels

Vendor NewsWorkrite Uniform Company, Inc., a leading provider of flame-resistant (FR) workwear worldwide, is taking their FR garment certifications to a new level of safety: certifying a wide variety of garments to the NFPA 2112 standard and accompanying those certified garments with a visible external label—the first FR garment provider to do so.

It is more common for FR fabrics to be NFPA 2112 certified, but Workrite takes an extra step to certify the whole garment, offering one of the broadest assortments of certified garments in the industry. An extra external label being added to certified garments allows customers to be sure their employees are wearing NFPA 2112-certified garments with a quick visual confirmation (there is also the required internal label on each certified garment).

NFPA 2112 is a national consensus standard: “Standard for Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire.” This safety standard specifies the minimum design, performance, certification requirements and test methods for FR garments used by employees at risk for flash fire. Workrite offers more than 160 NFPA 2112-certified styles that use multiple fabrics and colors, including Nomex® IIIA, Protera®, Ultra Soft® and Tecasafe® Plus. Each certified style is third-party tested annually, and Workrite continuously certifies additional styles to meet customer needs.

“Certifying our garments to NFPA 2112 guarantees that those garments have been audited as a finished product—the fabric, the trim items and the whole garment itself,” says Carol Krebs, general manager for industrial workwear at Workrite. “Plus, our unique external labeling gives our customers immediate confirmation that their employees are wearing the necessary protective clothing. We strive to provide the highest-quality FR workwear available, and that means going above and beyond to ensure that our garments meet the most stringent safety standards around.”

For more information on NFPA 2112 requirements or any additional detail about Workrite’s certified styles, please contact Workrite’s manager of customer service, Cathy Bennett, at (805) 981-6502, or call Danny Bracco at (805) 498-8718 x 106 to set up an interview with a Workrite executive.

About Workrite Uniform Company, Inc.

Founded in 1973, Workrite Uniform Company, Inc. has delivered high-quality flame-resistant (FR) workwear for 40 years. They are also the leading supplier for FR station wear for fire service. An ISO 9001:2008-certified company, Workrite is solely focused on the development and manufacturing of FR clothing. Workrite became an affiliate of Williamson-Dickie Mfg. Co. (“Dickies”) in 1999. For more information on Workrite and its FR programs, visit www.workrite.com.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Scenes from the World of Safety

Sights, signs & symbols from the National Safety Congress & Expo held in San Diego, CA, September 15-18

4/14/15 2:00 pm EDT

RISK-BASED SAFETY MANAGEMENT SYSTEM: Key Components for Applying Risk Tools to EHS Efforts

Join us for this webinar as we discuss how you can make effective use of risk analysis and risk management technology to guide efforts within your organization. We will distinguish between risk analysis and risk management; and identify some of the software tools that will help proactively identify, document, mitigate, and prevent high-risk events. You will learn how to improve compliance, reduce risk, and cut costs in your organization using these automated tools.

ISHN Magazine

ISHN0415_cover.jpg

2015 April

Check out ISHN's April issue, which features content about lockout-tagout, heat stress, hearing protection and more!

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - January 2015

FDO JAN 2015 COVER

 

For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. 

CHECK OUT THE JANUARY 2015 ISSUE OF FDO HERE

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.