Today's News / Compliance / Facility Safety

Company that retreads tires repeats hazards

American Made Tires faces $160,280 in OSHA fines for recurring fire, mechanical and electrical hazards

June 2, 2014
/ Print / Reprints /
ShareMore
/ Text Size+

OSHA Enforcement ActivityAmerican Made Tires, an Elmira Heights, NY tire retreader, failed to correct 12 hazards cited during a 2013 inspection by OSHA. Because of that inaction, and the discovery of new and recurring hazards during a follow-up OSHA inspection, the company faces an additional $160,280 in proposed fines.

"The company's inaction exposed employees to ongoing hazards of fire, falls, chemicals and to being caught in or crushed by unguarded or unexpectedly activated machinery," said Christopher Adams, OSHA's area director in Syracuse. "The sizable penalties proposed reflect the severity of these conditions and the employer's failure to follow through on its obligation and commitment to correct hazards that never should have existed."

Company failed to submit proof about hazard abatement

OSHA's Syracuse Area Office initially cited the company for 16 serious violations of workplace safety standards in July 2013, following an inspection conducted between March and July 2013. American Made Tires agreed to correct the cited hazards and pay the required fine of $20,100. When the company failed to submit proof that it had corrected the hazards, OSHA opened a follow-up inspection in November 2013.

The new inspection found ongoing hazards, including improperly constructed flammable adhesive spray booths located within 20 feet of spark-producing equipment; failure to implement lockout/tagout procedures to protect workers who service or maintain machines; lack of machine guarding for a tire buffer machine; and lack of a communications program and training for employees working with hazardous chemicals.

Because of these uncorrected hazards, OSHA issued American Made Tire 12 failure-to-abate notices, carrying $144,000 in fines.

Three repeat violations were cited for hazards similar to those cited in the earlier inspection. These included use of hazardous electrical equipment, accumulation of combustible dust and use of a spark-producing grinder in a flammable area. These violations carry $14,080 in fines.

Finally, one serious citation, with a $2,200 fine, was issued for use of a portable electric lamp in a spraying area during operations.

The failure-to-abate notices and citations can be viewed at http://www.osha.gov/ooc/citations/American_Made_Tire_896494_May_21_14.pdf* and http://www.osha.gov/ooc/citations/American_Made_Tires_950323_May_21_14.pdf*.

American Made Tires has 15 business days from receipt of its failure-to-abate notices, citations and proposed penalties to comply, meet informally with OSHA's area director, or contest the findings before the independent Occupational Safety and Health Review Commission.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Scenes from the World of Safety

Sights, signs & symbols from the National Safety Congress & Expo held in San Diego, CA, September 15-18

11/4/14 2:00 pm EST

Eye Injuries: You rarely see them coming. Practical Solutions for reducing injuries to the eye.

The 3M Eye Injury Reduction webinar will provide an examination of how to help solve eye injuries in the workplace. This issue continues to challenge virtually every industry, and the solution is often times multifaceted. 3M will share some new tools and approaches to help you in solving this issue.

ISHN Magazine

ISHN1014_cover.jpg

2014 October

This issue features articles about PPE safety and OSHA standards

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - SEPTEMBER 2014

ISHN FDO SEPTEMBER 2014For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. CHECK OUT THE SEPTEMBER 2014 ISSUE OF FDO HERE

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.