A Chicago-based manufacturer ignored safety requirements and put workers at risk for debilitating injuries because dangerous machines with moving parts lacked proper safety mechanisms.
The U.S. Chemical Safety Board (CSB) has voted to update the status of sixteen recommendations resulting from twelve accident investigations including key safety improvements resulting from the 2006 CAI/Arnel fire and explosion in Danvers, MA and the 2005 BP Texas City refinery fire and explosion.
A new employee working on a machine that forged parts lost a fingertip in a November, 2014 accident that could have been prevented, according to OSHA, if his company had trained him properly to operate the upsetter machine and if the machine had proper safety mechanisms.
OSHA inspectors acting on a complaint found safety hazards at one N.J. company that led them to find safety hazards at an additional company. Both companies are located at 473 Ridge Road in Dayton, New Jersey, and have the same management, maintenance employees and safety departments.
The White House has reviewed a draft of the rule and signed off on OSHA’s proposal – returning it to the agency with several undisclosed recommendations, according to Aaron Trippler, government affairs director for the American Industrial Hygiene Association.
Welding is the most common method of joining metals in industry today. When welded, two pieces of similar metals are fused (melted) together. Once completed, the welded joint is as strong or stronger than the pieces from which the joint is formed.
Welders should understand the hazards of the materials they are working with. OSHA’s Hazard Communication standard requires employers to provide information and training for workers on hazardous materials in the workplace.
"Can you hear me now?" The answer was a resounding "Yes" as mine rescue personnel deep underground were able to communicate with the surface command center as new technology was put to the test April 8 during a mine rescue simulation in West Finley, Pennsylvania at the Harvey Mine, owned by Consol Energy Inc.
Workers at a United States Postal Service (USPS) mail sorting facility were exposed to electrical hazards, OSHA inspectors found, and it wasn’t the first USPS location to have such hazards.
For the fifth time in the past three years, OSHA inspectors found workers at Wood Fibers Inc. at risk of amputation, fire and other life-threatening hazards in October 2014. Despite the agency’s intervention, the company has failed to provide proof that hazards had been fixed or that penalties from previous inspections have been paid.