Eye and Face Protection (1926.102) was the tenth most-frequently cited agency standard in FY 2019. Specialty Trade Contractors were the most-cited category for this standard, with 1,440 citations stemming from 1,434 inspections, resulting in $3,557,690 in proposed penalties.
ANSI/ISEA 121-2018 is a standard that consists of design, testing, performance and labeling requirements for tool tethering systems and containers used to transport and secure tools and equipment at heights.
As defined by OSHA, combustible dust is “a solid material composed of distinct particles or pieces, regardless of size, shape or chemical composition, which can present a fire or deflagration hazard when suspended in air or some other oxidizing medium over a range of concentrations.”
Last issue, we discussed whether it was hazards or is it hazardous energy. The conclusion is that it's really hazardous or potentially hazardous energy… which can move. People can also move, which means that eyes and mind on task are very important, which means that human error is important whenever people are moving or things around them are moving.
Flame-resistant (FR) doesn’t last forever. Since FR clothing can be expensive to replace, it’s usually best to repair these garments whenever possible. But if your FR clothing is beyond repair, your only choice will be to replace these garments.
Fall protection has been the number one most frequently cited OSHA violation for several years now, which means, worksites simply are not understanding the need to keep employees upright. Employers continue to take significant unnecessary “risk” when it comes to workplace slips, trips and falls by not taking the appropriate measures in evaluating their worksites.
On a Tuesday afternoon, you send a maintenance contractor out to a remote station to perform a routine check on some of your equipment. Your contractor drives out to the nearest access road, parks his truck, and walks over to the site. When he gets there, his personal gas monitor alerts him to high levels of dangerous gases...
When it comes to accidents, manufacturing ranks second highest of all industries. That comes despite OSHA regulations and American National Standards Institute (ANSI) standards. A key culprit is unguarded hazardous machinery.
ISO 45001, finalized in 2018, replaces a previous standard, OHSAS 18001, which was developed by auditors as a health and safety complement to quality and environmental standards (ISO 9001 and ISO 14001). ISO 45001 is a conformance standard, intended for use with third-party certification.
This is a voluntary consensus standard. It uses recognized management system principles in order to be compatible with quality and environmental management system standards such as ISO 9001, ISO 14001 and ISO 45001.