The National Transportation Safety Board (NTSB) has determined that the operator of a drone that collided with an U.S. Army helicopter failed to see and avoid the helicopter because he was intentionally flying the drone out of visual range and did not have adequate knowledge of regulations and safe operating practices.
The incident took place near Hoffman Island, New York, Sept. 21, 2017, when a DJI Phantom 4 small unmanned aircraft system and a U.S. Army Sikorsky UH-60M Black Hawk helicopter collided at an altitude of about 300 feet. The helicopter landed safely; the drone was destroyed. A 1 1/2 – inch dent was found on the leading edge of one of the helicopter’s four main rotor blades and parts of the drone were found lodged in the helicopter’s engine oil cooler fan.