The public will learn next month what caused an Amtrak train to collide head-on with a stationary CSX train near Cayce, South Carolina, when the National Transportation Safety Board (NTSB) announces the results of its investigation into the incident.
The engineer and conductor of the Amtrak train died as a result of the collision, which occurred on Feb. 4, 2018.
On December 18, 2017, at 7:34 a.m. Pacific standard time, southbound Amtrak (National Railroad Passenger Corporation) passenger train 501, consisting of 10 passenger railcars, a power railcar, a baggage railcar, and a locomotive at either end, derailed from a bridge near DuPont, Washington.
The clear skies offered good visibility and a lookout was posted on the morning of November 30, 2018, but those factors didn’t prevent a CSX Transportation freight train from striking and killing a track welder. The National Transportation Safety Board’s (NTSB) preliminary report on the incident offers few clues as to why the accident occurred. According to the report, the accident in Estill, South Carolina occurred as the train – traveling at about 50 miles an hour – approached a location where a welder was at work on the track.
Excessive rainfall that washed out a portion of the track was one of the factors in a June 22, 2018 train accident that released more than a quarter of a million gallons of crude oil into the Little Rock River, according to the National Transportation Safety Board (NTSB).
A preliminary report from the National Transportation Safety Board (NTSB) on the January 31 in Virginia collision between a garbage truck and an Amtrak passenger train indicates that witnesses said the garbage truck entered the crossing after the gates were down.
The National Transportation Safety Board (NTSB) issued three urgent safety recommendations last week, acting upon the agency’s findings in two ongoing railroad accident investigations.
The Federal Railroad Administration received one urgent safety recommendation based on NTSB findings in the agency’s investigation of the Feb. 4, 2018, collision of an Amtrak train and a CSX train near Cayce, South Carolina.
Two train accidents within 13 weeks of each other – one in New Jersey and the other in New York – had the same root causes, says the National Transportation Safety Board (NTSB): the undiagnosed sleep apnea of the trains’ engineers. Sleep apnea is a potentially serious sleep disorder in which breathing repeatedly stops and starts. It can result in a sufferer feeling tired even after a full night's sleep.
The National Transportation Safety Board (NTSB) Tuesday determined that two commuter railroad terminal accidents in the New York area were caused by engineer fatigue resulting from undiagnosed severe obstructive sleep apnea.
The Sept. 29, 2016, accident on the New Jersey Transit railroad at Hoboken, New Jersey, killed one person, injured 110, and resulted in major damage to the station.
The President and CEO of Amtrak is laying the blame for Sunday’s fatal train collision in South Carolina on CSX Corp.
Amtrak engineer Michael Kempf, 54 and 36-year-old conductor Michael Cella were killed and more than 100 people were injured – two of them critically - when an Amtrak passenger train slammed into a CSX freight train that was parked on a side track.
Among the articles in the November 2020 issue of ISHN Magazine, we discuss what smart factory really means, delve into the perils of water damage, learn how to prevent eye injuries, and take a deep dive into silicosis dangers when working with quartz.