Refine your results by

Choosing and Using the Best Gas Detection Technology for Specific Monitoring Applications

/ Print /
ShareMore
/ Text Size +
5/17/12 2:00 pm to 5/17/15 2:00 pm EDT
Online
Contact: Adam Thomas

Choosing and Using the Best Gas Detection Technology for Specific Monitoring Applications
*Certificate of Completion will be available on the event console 


No single gas detector is universally perfect for all applications. The best gas detector is the one that does the best job of meeting the requirements for your monitoring needs. The LEL, O2, CO and H2S sensors used in most portable instruments are accurate, dependable, and can last for years in normal operation; but they have important limitations. An instrument that underestimates or fails to detect the right hazard can be the cause of accidents. It’s important to be aware of additional technologies such as substance-specific electrochemical sensors, infrared (IR) and photoionization (PID) sensors that can provide a solution when standard sensors are not the best choice.

  • What the sensors in your gas detectors can (and can’t) actually detect
  • Choosing the best sensor technologies for specific monitoring applications
  • The most common mistakes people make when using their gas detectors
  • Calibrating sensors to maximize accuracy
  • Where to set the alarms
  • Changes in the TLV® exposure limit for H2S, SO2 and NO2, and what to do about it
  • Times when infrared combustible gas sensors may be a better choice
  • Using PIDs for measurement of toxic VOCs like benzene

Can't attend live? Register to view the webinar on-demand!

Speaker:

Bob Henderson

President
GfG Instrumentation

 *It is up to each individual to verify whether a given course is approved by their state licensing board

Sponsored by:

GfG

 

Multimedia

Videos

Image Galleries

Scenes from the World of Safety

Sights, signs & symbols from the National Safety Congress & Expo held in San Diego, CA, September 15-18

11/4/14 2:00 pm EST

Eye Injuries: You rarely see them coming. Practical Solutions for reducing injuries to the eye.

The 3M Eye Injury Reduction webinar will provide an examination of how to help solve eye injuries in the workplace. This issue continues to challenge virtually every industry, and the solution is often times multifaceted. 3M will share some new tools and approaches to help you in solving this issue.

ISHN Magazine

ISHN1014_cover.jpg

2014 October

This issue features articles about PPE safety and OSHA standards

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - SEPTEMBER 2014

ISHN FDO SEPTEMBER 2014For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. CHECK OUT THE SEPTEMBER 2014 ISSUE OF FDO HERE

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.