Today's News

Cameraman falls to death at race course after company removes guardrails

OSHA has cited Lucas Oil Production Studios of Corona, Calif., following the death of a cameraman at the Thunder Valley Motocross race course outside of Lakewood, Colo., on June 25.

OSHA's investigation found that the cameraman fell from an elevated all-terrain scissor lift from which guardrails had been removed, according to an agency press release. The company also exposed other cameramen and technicians to fall hazards by removing guardrails from several other scissor lifts.

"Lucas Oil Production Studios failed to provide its employees with a safe and healthful workplace," said Greg Baxter, OSHA's regional administrator in Denver, Colo. "The company demonstrated indifference to the requirements of the Occupational Safety and Health Act, which resulted in fatal injuries to its employee."

OSHA has proposed $91,000 in fines against the company for one alleged willful, two alleged serious and one other-than-serious violation. The willful citation addressed the deliberate removal of the guardrails from the scissor lifts exposing employees to fall hazards up to 27 feet. A willful violation is one committed with intentional knowing or voluntary disregard for the law's requirements, or with plain indifference to worker safety and health.

The serious citations addressed the employer's failure to provide any training to employees on the proper operating procedures of all-terrain scissor lifts, and exposing employees to crushing and amputation hazards by not having established a lockout program for performing modifications on the lifts. A serious citation is issued when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

An other-than-serious citation was issued alleging the company failed to report the incident. An other-than-serious violation is one that has a direct relationship to job safety and health, but probably would not cause death or serious physical harm.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

ISHN's Favorite Cover Images

Take a look at some of our favorite cover images!
6/5/13 2:00 pm EST

A Safety Manager’s Guide to Dust Compliance

On demand This webinar will provide an overview of the standards that are providing safety managers a blueprint for compliance. During the NFPA Standards review component, NFPA 652, NFPA 654, NFPA 61 and other relevant Combustible Dust and Combustible Metals Dust Standards will be highlighted and discussed.

THE MAGAZINE

ISHN Magazine

ISHN June 2013 cover

2013 June

ISHN's June issue features a number of articles on heat stress, fall protection systems, safety management, and body protection tips.

Table Of Contents Subscribe

THE ISHN STORE

ANSI/ASSE A10.1-2011 Pre-Project & Pre-Task Safety and Health Planning

This standard establishes the elements and activities for pre-project and pre-task safety and health planning in construction.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

ISHN Webinars are an easy, effective and convenient way to get educated and informed on the latest industry trends and topics. All Webinars are FREE unless indicated. For more information, check out our Events page!

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn