Today's News

OSHA cites Ohio-based trenching company following worker fatality (10/5)

October 5, 2010
/ Print / Reprints /
ShareMore
/ Text Size+

OSHA has cited A. Bagnoli and Sons Inc., a water, sewer and utility excavation company located in Poland, Ohio, with four alleged willful and serious safety violations after one worker was killed and another seriously injured, an agency press release states. The incident occurred when part of a 17-foot deep by 65-foot long trench caved in on April 7, in Hudson Ohio, trapping the two workers for more than six hours.

"Cave-in accidents are a leading cause of worker fatalities during excavations, and this was a completely avoidable accident had the company followed all the required OSHA standards. Employees were not adequately protected from cave-ins while working in trenches that reached up to 17 feet deep, and they had no safe way to get out of the trench in case of emergency," said Rob Medlock, OSHA's area director in Cleveland, Ohio. "Company representatives are well aware of OSHA safety requirements while excavating but chose to ignore them, thus putting their workers in unnecessary danger."

OSHA cited A. Bagnoli and Sons with two alleged willful violations for failing to provide proper cave-in protection shields at the excavation site and provide employees with a safe egress while entering and exiting a trench. A willful violation is one committed with intentional, knowing or voluntary disregard for the law's requirements, or plain indifference to employee safety and health.

Additionally, the company was cited for two serious citations with proposed penalties of $4,200 for allowing employees to work under loads lifted by digging equipment and failing to keep excavated materials at least 2 feet from the edge of the excavation area. An OSHA violation is serious if death or serious physical harm can result from a hazard an employer knew or should have known exists. Total proposed fines equal $140,000.

In 1989, A. Bagnoli and Sons was issued one serious citation for a lack of proper trenching protective equipment and a second serious citation for lack of required personal protective equipment.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

Multimedia

Videos

Image Galleries

ASSE Safety 2014 Review

A gallery of photos from the sprawling Orange County Convention Center in Orlando, where ASSE’s annual professional development conference was held June 8-11. All photos courtesy of the American Society of Safety Engineers.

9/9/14 2:00 pm EDT

Welding: It doesn't have to be a grind. The latest in respiratory protection and PPE for welders and grinder

Attendees of this webinar will gain knowledge of hazards and appropriate PPE for welding applications, regulatory drivers that are changing the landscape of PPE within welding applications and the latest product technologies being offered in welding PPE.

ISHN Magazine

ISHN_0814cov.jpg

2014 August

Check out ISHN's August issue which features content about pain prevention, forklift operation safety and a preview of the National Safety Congress and Expo.

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - May 2014

ISHN0514FDO_cover.jpgFor Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. CHECK OUT THEMAY 2014 ISSUE OF FDO HERE

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.