Today's News

Planes clip wings at JFK (4/12)

April 12, 2011
/ Print / Reprints /
ShareMore
/ Text Size+


The National Transportation Safety Board (NTSB)is investigating a wing tip clipping that occurred between an Airbus A380 (F- HPJD) and a Bombardier CRJ-700 (N641CA) at John F. Kennedy Airport in New York last night.

At 8:25 PM EDT, the left wing tip of Air France flight 7 struck the left horizontal stabilizer of Comair flight 293 while the Comair airplane was taxiing to its gate. There were 485 passengers and 25 crew onboard the Airbus and 52 passengers and 4 crew onboard the CRJ. No injuries were reported on either aircraft.

The damage sustained to both aircraft is still being assessed.

The NTSB has requested the fight recorders (cockpit voice recorder and flight data recorder) from both aircraft and will review the content of those devices as part of the investigation. Additionally, the NTSB will review the air traffic control tapes and ground movement radar data (ASDE-X).

Parties to this investigation include the Federal Aviation Administration, Comair, and the Air Line Pilots Association. Also, accredited representatives from the French Bureau d'Enquetes et d'Analyses (BEA), the Transportation Safety Board of Canada (TSB), and their advisors from Airbus, Air France, and Bombardier Aerospace, are assisting the investigation.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn

Multimedia

Videos

Image Galleries

ASSE's Safety 2013 Review

A photo gallery from the Las Vegas Convention Center, where ASSE’s annual professional development conference was held June 24 to 27. All photos courtesy of the American Society of Safety Engineers.

THE MAGAZINE

ISHN Magazine

ishn april 2014 issue cover

2014 April

In this month's issue of ISHN, check out features about safety in the oil and gas industry.

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - January 2014

ISHN0114_FDO_cov.jpgFor Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. CHECK OUT THEJANUAYR 2014 ISSUE OF FDO HERE

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.