AccuFIT 9000™ is a new RFT that uses a single mode of operation to perform fit tests on all respirator types including N95. Based on time-proven CNC Particle Counting it is both a ‘stand-alone’ device, or connects to PC’s and tablets using WiFi, Ethernet or USB to run 4 tests simultaneously.
Certain respirators, known as tight-fitting respirators, must form a tight seal with your face or neck to work properly, according to OSHA. If your respirator doesn't fit your face properly, contaminated air can leak into your respirator facepiece, and you could breathe in hazardous substances.
County Concrete Corp. of East Orange, New Jersey is facing $88,544 in penalties after OSHA inspectors found multiple safety and health violations at the company. Foremost among them: employees were exposed to silica above the permissible limit as they cleaned concrete mixers. OSHA cited County Concrete for these same hazards in 2013.
Question: If an employee with a neatly trimmed goatee is wearing a respirator and it does not interfere with the seal of the face piece or valve function, and has passed a fit test, does this meet the intent of the OSHA’s Respiratory Protection standard?
OSHA has issued a Notice of Proposed Rulemaking to add two quantitative fit-testing protocols to the agency's Respiratory Protection Standard. The protocols would apply to employers in the general, shipyard and construction industries.
Here are NIOSH’s top 5 reasons to tune into N95 Day this year: 1. Using social media for respiratory protection resources – it’s like a breath of fresh air If you’re all about respiratory protection, then it’s all about #N95Day on September 6th.
The VeriFit® Irritant Smoke Generator revolutionizes respirator fit testing
December 9, 2014
Nextteq’s VeriFit® Irritant Smoke Generator integrates all the necessary components of a traditional irritant smoke fit testing kit into one convenient device, and offers users cost and safety advantages compared to other qualitative fit test kits.
OHD, Inc., is excited to announce the release FitTrack GoldTM, version 188.8.131.52. FitTrack Gold is software used to operate the OHD Quantifit® respirator fit tester. While many customers have hinted at proactive changes to the software, FDNY was the catalyst for all of the changes in this particular release.
Nearly 4,000 people lent their measurements to robotic manikin
August 5, 2013
He’s not good-looking and he doesn’t get around much, but the “talking head” the National Institute for Occupational Safety and Health (NIOSH) is about to start using in its respiratory fit research is pretty articulate.
Among the articles in the January 2020 issue of ISHN Magazine, we review the most violated OSHA standards, Part 2 of Larry Wilson's 'Rethinking Traditional Safety' column series, insight from safety experts, and much more.