Today's News

Company cited after employee is killed in plastic injection molding machine (4/16)

April 16, 2010
/ Print / Reprints /
ShareMore
/ Text Size+

OSHA has cited Buckhorn Inc. in Springfield for alleged violations of the Occupational Safety and Health Act following the investigation of an accident in which an employee was crushed inside a plastic injection molding machine, according to an agency press release.

“There is no excuse for this accident. This worker should not have been allowed to work in the machine without energy sources being locked out,” said Charles Adkins, OSHA’s regional administrator in Kansas City, Mo. “It is imperative that employers take the necessary steps to eliminate hazards and provide a safe working environment for all of their employees to prevent accidents like this from occurring.”

OSHA’s investigation of the company found one willful and 15 serious violations of the OSH Act. The willful violation stems from the company's failure to ensure the plastic injection molding machine was isolated from energy sources/turned off and locked out when employees were performing maintenance activities inside the machine danger zone. OSHA issues a willful violation when an employer exhibits plain indifference to or intentional disregard for employee safety and health.

The serious violations stem from a lack of open sided floor guarding; obstructed emergency exits; permit required confined space deficiencies; a lack of lockout/tagout training and periodic inspection; a lack of eyewash facilities; improperly stored materials; powered industrial trucks in need of repair not taken from service; welding cylinders not secured in storage; electrical wiring installation deficiencies; lack of strain relief on flexible cords in use; and unmarked containers of hazardous materials. OSHA issues a serious citation when death or serious physical harm is likely to result from a hazard about which an employer knew or should have known.

OSHA has proposed $116,000 in penalties against the company. Buckhorn Inc. has 15 business days from receipt of the citations to comply, request an informal conference with OSHA’s area director in Kansas City, Mo., or contest the findings before the independent Occupational Safety and Health Review Commission.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn

Multimedia

Videos

Image Galleries

ASSE's Safety 2013 Review

A photo gallery from the Las Vegas Convention Center, where ASSE’s annual professional development conference was held June 24 to 27. All photos courtesy of the American Society of Safety Engineers.

THE MAGAZINE

ISHN Magazine

ishn april 2014 issue cover

2014 April

In this month's issue of ISHN, check out features about safety in the oil and gas industry.

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - January 2014

ISHN0114_FDO_cov.jpgFor Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. CHECK OUT THEJANUAYR 2014 ISSUE OF FDO HERE

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.