Today's News

OSHA proposes revised respirator fit test procedures (1/22)

January 22, 2009
/ Print / Reprints /
ShareMore
/ Text Size+

OSHA has proposed revised fit tests for determining the effectiveness of respiratory protection facemasks, according to an agency press release.

The Notice of Proposed Rulemaking (NPRM) was published yesterday in the Federal Register. The rule proposes two revised fit test procedures under OSHA’s Respiratory Protection Standard.

In 1998, OSHA issued the revised OSHA Respiratory Protection Standard, 29 CFR 1910.134, which incorporated two categories of respirator fit tests. Some tests expose wearers to airborne agents to determine if they can detect them and other tests use a machine to measure how much of a test agent leaks into a respirator. The proposed revisions would allow certain machine-based fit tests to be conducted more quickly and increase the required score for passing them.

The Agency encourages the public to comment on the proposed rule. Go to http://www.regulations.gov and reference Docket No. OSHA-2007-0007. Comments may also be submitted by fax at (202) 693-1648 or by mail to the OSHA Docket Office, Technical Data Center, Room N-2625, OSHA, Department of Labor, 200 Constitution Avenue, N.W., Washington, DC 20210.

For more information, visit www.osha.gov.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

Multimedia

Videos

Image Galleries

ASSEâ??s Safety 2014 Review

A gallery of photos from the sprawling Orange County Convention Center in Orlando, where ASSE’s annual professional development conference was held June 8-11. All photos courtesy of the American Society of Safety Engineers.

6/26/14 2:00 pm EDT

Realizing ROI from Your Gas Detection Program

This presentation will cover why a safe workplace equates to good business, why keeping workers truly safe from hazardous gases requires a complete gas detection program, and how your investment can ensure an ROI to your overall business.

ISHN Magazine

ISHN0714_cover.jpg

2014 July

In this month's issue of ISHN, check out the top training companies and find out who the winners of the ISHN/ASSE Safety 2014 awards are.

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - May 2014

ISHN0514FDO_cover.jpgFor Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. CHECK OUT THEMAY 2014 ISSUE OF FDO HERE

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.