Today's News

Trench cave-in kills one worker, injures another in Ohio (6/21)

June 21, 2011
/ Print / Reprints /
ShareMore
/ Text Size+


OSHA has cited Bontrager Excavating LTD in Uniontown for two alleged willful, two serious and one repeat safety violation for failing to protect workers from cave-ins during trenching operations. An inspection was initiated after one worker was killed and another was injured in a trench collapse on Dec. 28, 2010, in Stark County.

"Cave-ins are a leading cause of worker fatalities during excavations. Failing to take adequate safety measures to prevent cave-ins had a tragic result in this situation," said Howard Eberts, OSHA's area director in Cleveland. "OSHA implemented a trenching and excavation special emphasis program in the 1980s, so the industry is well aware of the safety regulations for trenching operations."

The willful violations involve failing to properly protect workers from trench cave-ins while installing sewer lines in a Stark County residential neighborhood. One trench box was used, but it was placed 8 feet below grade and the trench wall collapsed above the box, resulting in the death of a foreman and injury to another worker. Additionally, a trench box was not consistently used in another trench on the same job site during part of the installation project. When that trench box was used, it also was placed below grade. A willful violation is one committed with intentional knowing or voluntary disregard for the law's requirements, or with plain indifference to worker safety and health.

OSHA standards mandate that all excavations 5 feet or deeper be protected against collapse.

The repeat violation was cited for failing to provide a safe means of egress to employees working inside a trench box. OSHA regulations require that a stairway, ladder, ramp or other means of egress be provided in a trench. A repeat violation exists when an employer previously has been cited for the same or a similar violation of a standard, regulation, rule or order at any other facility in federal enforcement states within the last five years. Bontrager Excavating was cited for the same violation in 2007.

The serious violations involve failing to ensure a safe means was used to determine the location of underground utilities and to ensure a trench shield system was no more than 2 feet off the bottom of a trench floor.

OSHA has placed Bontrager Excavating in its Severe Violator Enforcement Program, which mandates targeted follow-up inspections to ensure compliance with the law. Initiated in June 2010, the program focuses on recalcitrant employers that endanger workers by committing willful, repeat or failure-to-abate violations. Bontrager Excavating was placed in the program due to the fatality for which a willful violation was cited.

Prior to OSHA's inspection in December 2010, Bontrager Excavating had been inspected six times since 1992, resulting in 12 citations for various trenching hazards. Based on the latest inspection, Bontrager Excavating faces proposed penalties of $157,710.

Did you enjoy this article? Click here to subscribe to ISHN.

You must login or register in order to post a comment.

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

Multimedia

Videos

Image Galleries

ASSE Safety 2014 Review

A gallery of photos from the sprawling Orange County Convention Center in Orlando, where ASSE’s annual professional development conference was held June 8-11. All photos courtesy of the American Society of Safety Engineers.

9/30/14 2:00 pm EST

Leveraging Sustainability Initiatives to Benefit Your Community and Increase Compliance

This webinar will review how General Motors' Sustainability initiatives are being leveraged to improve the community and the environment, create efficient energy programs, improve sustainability tracking, impact on processes and overall reporting and improve overall social, environmental and corporate sustainability.

ISHN Magazine

ISHN SEPTEMBER 2014 COVER

2014 September

ISHN'S September issue features a series of essay on thought leadership. Get expert advice on self-motivation, compliance and more!

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - SEPTEMBER 2014

ISHN FDO SEPTEMBER 2014For Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. CHECK OUT THE SEPTEMBER 2014 ISSUE OF FDO HERE

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.