8 steps to shaping your safety culture

August 11, 2006
/ Print / Reprints /
ShareMore
/ Text Size+
Shaping a new safety culture: Include all behavioral aspects (Organizational, Leadership, Hourly Workforce); utilize education, measurement and positive reinforcement; address physical conditions and understand compliance issues.


In order to improve your workplace safety culture, follow these eight steps and you’ll be on the road to positive change.

1 Know the “now” safety culture

A thorough understanding of the existing culture must be accomplished. This can be realized by canvassing a large sampling of the total workforce to measure what perceptions, practices and conditions related to safety currently exist. A cultural survey can surface what is working and what is not. The information obtained can provide direction for change.

2 Secure management/supervision commitment

Without the commitment of leadership no change can be effected. Leadership and organizational behaviors are key to the success of any process…setting the example to follow. Workers’ behaviors often mirror those of management and supervision. Once employees see management and supervision “walk the talk” they’ll begin to trust and accept that the change is genuine.

3 Determine, agree on and communicate parameters

The biggest element in safety culture is the behavioral element. All parties must agree to look at practices (behaviors) and determine those best suited to working safely. Workplace conditions and compliance/disciplinary processes must also be evaluated. Communication systems and levels of involvement by all workers need to be included in determining the safety culture change components. All employees should be involved in drawing up the picture of the desired safety culture.

4 Develop a plan for change and ongoing process

Once the parameters of change are identified, a roadmap must be developed. This involves determining training methods and schedules, measurement processes and means of communication, and defining and assigning responsibilities and accountabilities. Lead and working sub-teams must be formed.

5 Educate

Training is an important step in the process of changing behaviors. Leadership behaviors have been identified as key to developing a new safety culture. Therefore, supervisors play a very important role in this effort. Employees are often promoted to supervisory positions based on job skill with little or no training in leading people. The supervisor is the direct link between management and primary employees, therefore supervisors must be given the training and tools needed to deal with satisfying the needs of both management and the primary workforce, which are often in conflict.

6 Measure

What gets measured gets done. Once a measurement process has been decided on (with a behavioral-based process this involves daily observations and analysis), it is important to utilize and communicate the information gathered. If data is collected and nothing is done with it, it becomes worthless. In developing the measurement process, solicit input from the entire workforce in identifying the best safe practices and conditions to be measured. Don’t underestimate the knowledge of hourly employees.

7 Reinforce & communicate

People do more of what brings good consequences. Positive reinforcement is an important element missing from many workforce cultures. Statistics show that when workers are positively reinforced they will go beyond what is expected of them.

A strong communication system between all employees in all directions needs to be encouraged.

8 Develop informal leaders and a sense of community

Informal leaders in the workforce are usually well recognized. They play an important role in the success of any change, and their buy-in can be critical. Champions often surface in the planning and training stages. These champions should be nurtured and encouraged to become informal leaders and decision-makers.

A sense of community will build as trust is developed and people begin to learn more than just their job responsibilities.

Did you enjoy this article? Click here to subscribe to ISHN.

Recent Articles by DJ Borbidge

You must login or register in order to post a comment.

STAY CONNECTED

Facebook logo Twitter YouTubeLinkedIn Google + icon

Multimedia

Videos

Image Galleries

ASSE Safety 2014 Review

A gallery of photos from the sprawling Orange County Convention Center in Orlando, where ASSE’s annual professional development conference was held June 8-11. All photos courtesy of the American Society of Safety Engineers.

9/9/14 2:00 pm EDT

Welding: It doesn't have to be a grind. The latest in respiratory protection and PPE for welders and grinder

Attendees of this webinar will gain knowledge of hazards and appropriate PPE for welding applications, regulatory drivers that are changing the landscape of PPE within welding applications and the latest product technologies being offered in welding PPE.

ISHN Magazine

ISHN_0814cov.jpg

2014 August

Check out ISHN's August issue which features content about pain prevention, forklift operation safety and a preview of the National Safety Congress and Expo.

Table Of Contents Subscribe

THE ISHN STORE

M:\General Shared\__AEC Store Katie Z\AEC Store\Images\ISHN\safetyfourth.jpg
Safety Engineering, 4th Edition

A practical, solutions-driven reference, Safety Engineering, 4th edition, has been completely revised and updated to reflect many of today’s issues in safety.

More Products

For Distributors Only - May 2014

ISHN0514FDO_cover.jpgFor Distributors Only is ISHN's niche brand standard-sized magazine supplement aimed at an audience of 2,000 U.S. distributors that sell safety products. Circulation only goes to distributors. CHECK OUT THEMAY 2014 ISSUE OF FDO HERE

ishn infographics

2012 US workplace deathsCheck out ISHN's new Infographic page! Learn more about worker safety through these interactive images. CLICK HERE to view the page.