OSHA Assistant Secretary Dr. David Michaels appointed Dean McKenzie as the new director of the agency's Directorate of Construction. McKenzie has been with OSHA for seven years including serving as deputy director of DOC.
Every page on OSHA's website can now be translated into Spanish with one click of your mouse or tap of your finger. Just go to the Spanish link at the top right corner of every webpage to have the text instantly translated.
OSHA inspectors in Ocala, Florida looked up, and saw employees of D.R. Horton Inc. – one of the nation’s largest homebuilders , installing roofing sheathing without benefit of fall protection.
An investigation that began after an OSHA compliance officer observed a roofing employee working on low slope roofs without fall protection turned up the information that it wasn’t first time the company had exposed its workers to life-threatening falls.
Dorchester, Massachusetts-based contractor Roof Kings LLC exposed employees to life-threatening falls - more than 45 feet off the ground - over a three-day period as they worked at a Haverhill church, federal workplace safety and health inspectors found.
R. Ronald Sokol, a 29-year member of the American Society of Safety Engineers, was appointed to the OSHA Advisory Committee on Construction Safety and Health (ACCSH), which is charged with advising the agency on setting construction standards and policy matters affecting federally financed or assisted construction.
Despite advances in safety for construction workers across a variety of settings, those who must use elevating work platforms (MEWPs) and aerial work platforms (AWPs) to perform their job duties remain at risk.
Accidents on construction projects cause too many painful injuries and claim far too many lives. Our primary concern when we discuss the factors or causes behind an accident is to find a way to prevent a recurrence. The cause of an accident can be found in two areas -- Unsafe Acts and Unsafe Conditions.
Most construction workers use hand tools. Some use them all day long. Using the wrong hand tool, or the right tool the wrong way, can injure the muscles, tendons, or nerves in your hand, wrist, or arm. These types of injuries develop over time. Early symptoms may include achy, tired hands and wrists that feel better after rest. It is easy to just write these off to a hard day’s work – and in some cases you can end up with an injury that might even force you to quit construction work.