Three of the nation’s leaders in occupational health and safety have launched a new online course intended to help employers integrate their health and safety programming in ways that can bolster bottom-line results while improving the health and wellbeing of their workers.
A revision of ANSI R15.06-1999, this standard provides guidelines for the manufacture and integration of Industrial Robots and Robot Systems with emphasis on their safe use, the importance of risk assessment and establishing personnel safety.
1. Read the Book. A welder’s operating manual contains important safety information, as well as information procedures that maximize the machine’s potential. Make sure everyone who operates the machine is familiar with its contents.
1 Electric shock
Electric shock is one of the most serious and immediate risks facing a welder. Electric shock can lead to severe injury or death, either from the shock itself or from a fall caused by the reaction to a shock.
Electric shock occurs when welders touch two metal objects that have a voltage between them, thereby inserting themselves into the electrical circuit.
Q. What is a fume plume?
A. A fume plume is the clearly visible column of fume that rises directly from the spot of welding or cutting. Welders and cutters should take precautions to avoid breathing this area directly. Ventilation can direct the plume away from the face.
Before any welding is conducted outside of a designated welding area, a responsible individual must inspect the area and identify precautions to be taken preferably on a written Hot Works permit. Fire extinguishers must be ready for immediate use. A fire watch lasting at least 30 minutes after the welding or cutting operations is required if more than a minor fire might develop.
General hazards of welding include impact, penetration, harmful dust, smoke, fumes, heat and light radiation. Welding “smoke” is a mixture of very fine particles (fumes) and gases. Many of the substances in the smoke can be extremely toxic.
Hearing loss is one of the most common work-related illnesses in the United States. NIOSH estimates that 22 million U.S. workers encounter noise exposures loud enough to be hazardous. Wildland fire fighting (vs. urban/ structural fire fighting), aims to suppress grass, brush, or forest fires.
The American Cancer Society's CEOs Against Cancer® program will host Fit2BeCancerFree®, a virtual step-tracking fitness challenge to be held on April 19 during National Cancer Control Month.
Work-related disability is associated with many negative health and social outcomes including reduced quality of life, job loss, reduced lifetime income, injuries among family caregivers, and premature death.
RSS
