1 Electric shock
Electric shock is one of the most serious and immediate risks facing a welder. Electric shock can lead to severe injury or death, either from the shock itself or from a fall caused by the reaction to a shock.
Electric shock occurs when welders touch two metal objects that have a voltage between them, thereby inserting themselves into the electrical circuit.
Q. What is a fume plume?
A. A fume plume is the clearly visible column of fume that rises directly from the spot of welding or cutting. Welders and cutters should take precautions to avoid breathing this area directly. Ventilation can direct the plume away from the face.
Before any welding is conducted outside of a designated welding area, a responsible individual must inspect the area and identify precautions to be taken preferably on a written Hot Works permit. Fire extinguishers must be ready for immediate use. A fire watch lasting at least 30 minutes after the welding or cutting operations is required if more than a minor fire might develop.
General hazards of welding include impact, penetration, harmful dust, smoke, fumes, heat and light radiation. Welding “smoke” is a mixture of very fine particles (fumes) and gases. Many of the substances in the smoke can be extremely toxic.
Hearing loss is one of the most common work-related illnesses in the United States. NIOSH estimates that 22 million U.S. workers encounter noise exposures loud enough to be hazardous. Wildland fire fighting (vs. urban/ structural fire fighting), aims to suppress grass, brush, or forest fires.
The American Cancer Society's CEOs Against Cancer® program will host Fit2BeCancerFree®, a virtual step-tracking fitness challenge to be held on April 19 during National Cancer Control Month.
Work-related disability is associated with many negative health and social outcomes including reduced quality of life, job loss, reduced lifetime income, injuries among family caregivers, and premature death.
OSHA’s recent decision to delay the effective date of its controversial beryllium exposure rule has generated a lot of attention in the industrial safety media, and rightly so. The beryllium rule is a perfect example of the government overreach that industry often highlights: policies made with good intentions that go beyond their stated goal.
Thousands of retired miners in seven states will lose their health care coverage by the end of the year – unless Congress passes the Miners Protection Act, Senate Bill 175 and House Resolution 179 by the end of the month.
The National Institute for Occupational Safety and Health (NIOSH) is seeking public comment on a draft Current Intelligence Bulletin entitled The NIOSH Occupational Exposure Banding Process: Guidance for the Evaluation of Chemical Hazards for public comment.
RSS
