Today's Safety News - Articles - Page 207

2019 top standards- OSHA Most Frequently Violated Standards

OSHA lockout tagout standard

Control of Hazardous Energy (Lockout-Tagout) General Industry (1910.147)

January 4, 2019

Workers servicing or maintaining machines or equipment may be seriously injured or killed if hazardous energy is not properly controlled. Injuries resulting from the failure to control hazardous energy during maintenance activities can be serious or fatal. Injuries may include electrocution, burns, crushing, cutting, lacerating, amputating, or fracturing body parts.

2019 top standards- OSHA Most Frequently Violated Standards

OSHA powered industrial truck standard

Powered Industrial Trucks (1910.178)

January 4, 2019

OSHA statistics indicate that there are roughly 85 forklift fatalities and 34,900 serious injuries each year, with 42 percent of the forklift fatalities from the operators being crushed by a tipping vehicle.

OSHA’s ladders standard for construction

2019 top standards- OSHA Most Frequently Violated Standards

OSHA ladders standard

Ladders (1926.1053)

January 4, 2019

Factors contributing to falls from ladders include haste, sudden movement, lack of attention, the condition of the ladder (worn or damaged), the user's age or physical condition, or both, and the user's footwear.

2019 top standards- Critical OSHA standards

OSHA confined space general industry standard

29 CFR 1910.146: OSHA Confined Space Standard – General Industry

January 3, 2019

The standard applies to all general industry places of employment, including agricultural services, manufacturing, transportation and utilities, wholesale trade, food stores, hotels and other lodging, health services, museums, botanical gardens and zoos.

2019 top standards- Global Standards

ISO 45001 safety and health management system standard

ANSI/ASSP/ISO 45001— 2018 Occupational Health and Safety Management Systems – Requirements with Guidance for Use

January 3, 2019

Experts say 45001 is not easy to apprehend when read as a normal book, especially if you are not familiar with the ISO framework of 9001 and 18001. You have to realize the interconnections between specific clauses. Experts advise finding a good training course to help realize the standard’s full potential. You may also want to consider employing consultancy services to assist.

Government shutdown leaving health programs unfunded

January 2, 2019

The ongoing federal government shutdown is posing a threat to public health, according to the American Public Health Association (APHA). The organization’s executive director, Georges C. Benjamin, identified the Indian Health Service, Food and Drug Administration, parts of the Department of Health and Human Services and the U.S. Department of Agriculture as funding losers due to the shutdown.

Passengers fall ill on domestic flight

January 2, 2019

A drinking fountain in Cleveland Hopkins International Airport may be the culprit behind a half dozen passengers falling ill on a Cleveland-to-Tampa flight yesterday. News sources say six people on a Frontier Airlines flight became sick en route to their destination. Health officials boarded the plane when it landed at Tampa International Airport.

Pure Safety Group opens HQ, global training facility

January 2, 2019

Pure Safety Group (PSG), has opened the doors to its 33,000-square-foot corporate headquarters office and global training facility this month in conjunction with the National Safety Congress (NSC) in Houston, Texas. The training facility, the largest dedicated to height safety in the industry, features the new PSG training program, the most current curriculum in the industry.

2019 top standards- OSHA Most Frequently Violated Standards

OSHA machine guarding standard

OSHA’s machine guarding standard was the ninth-most-frequently cited agency standard in FY 2018.

January 1, 2019

Machine safeguarding is the best way to prevent amputations. Guards provide physical barriers to hazardous areas. They should be secure and strong, and workers should not be able to by-pass, remove or tamper. Guards should not obstruct the operator’s view or prevent others from working.