The standard applies to all occupational exposures to respirable crystalline silica, except where employee exposure will remain below 25 μg/m3 as an 8-hour TWA under any foreseeable conditions and those occurring during agricultural operations covered under 29 CFR part 1928 and and exposures that result from the processing of sorptive clays.
OSHA 1926.1201 Safety and Health Regulations for Construction: Confined Spaces in Construction
January 3, 2019
Any entity doing construction work, such as building a new structure or upgrading an old one, must follow the construction confined space rule. Because the new rule applies to all employers who perform construction activities in a confined space, safety managers in all industries should become familiar with the standard.
Few employees may ever take notice of a freshly cleaned, well-maintained floor. Unfortunately, too few also tend to notice uneven surfaces that cause trips or spilled materials that can make floors slippery. That’s one of the reasons why it’s up to employers to make sure that these types of hazards are eliminated.
The American Society of Safety Professionals (ASSP) Foundation today released a fatigue research report that shows the value of wearable technology in the workplace, encouraging employers to make a New Year’s resolution to monitor the fatigue levels of its workers to reduce injuries and increase productivity.
A new report by EUROGIP presents an analysis of the extent to which occupational cancers are recognised in nine European countries: Austria, Belgium, Denmark, Finland, France, Germany, Italy, Sweden and Switzerland. It also looks at the schemes for identifying occupational cancers, especially via monitoring the health of people exposed to carcinogens in the course of their working careers.
OSHA’s machine guarding standard was the ninth-most-frequently cited agency standard in FY 2018.
January 1, 2019
Machine safeguarding is the best way to prevent amputations. Guards provide physical barriers to hazardous areas. They should be secure and strong, and workers should not be able to by-pass, remove or tamper. Guards should not obstruct the operator’s view or prevent others from working.
With a new year dawning, it’s a good time to review the rights and requirements of the Occupational Safety and Health Act of 1970 (OSH Act), which was passed to prevent workers from being killed or otherwise harmed at work.
The OSH Act gives workers the right to safe and healthful working conditions. In order to ensure their protection from job hazards, workers can:
Here's to a safe, healthy and happy new year for you, your family, your friends and your co-workers. We here at ISHN will do our part to make that happen by bringing you information you need about health and welfare, workplace safety tips and trends, emerging technology and products to enhance worker safety and regulatory developments that impact your job.
FR protective clothing was a HOT topic in 2018 – from how to wear it during extreme heat and extreme cold, to what private industry can all learn from the Navy’s FR program. A back-of-the-hand protection standard for work gloves, how work boots are getting lighter (but staying strong) and the need to protect first responders from fentanyl exposure were among the top PPE stories of 2018:
Confined space safety, hazards in the oil and gas industry and how workers compensation exposure data can be useful to the safety profession were among the top industrial hygiene stories of 2018.