Environmental Health and Safety - Articles - Page 186

2019 top standards- Critical OSHA standards

OSHA confined space general industry standard

29 CFR 1910.146: OSHA Confined Space Standard – General Industry

January 3, 2019

The standard applies to all general industry places of employment, including agricultural services, manufacturing, transportation and utilities, wholesale trade, food stores, hotels and other lodging, health services, museums, botanical gardens and zoos.

2019 top standards- Critical OSHA Standards

OSHA silica standard

1910.1053 Respirable crystalline silica

January 3, 2019

The standard applies to all occupational exposures to respirable crystalline silica, except where employee exposure will remain below 25 μg/m3 as an 8-hour TWA under any foreseeable conditions and those occurring during agricultural operations covered under 29 CFR part 1928 and and exposures that result from the processing of sorptive clays.

2019 Top Standards- Critical OSHA Standards

OSHA confined space construction standard

OSHA 1926.1201 Safety and Health Regulations for Construction: Confined Spaces in Construction

January 3, 2019

Any entity doing construction work, such as building a new structure or upgrading an old one, must follow the construction confined space rule. Because the new rule applies to all employers who perform construction activities in a confined space, safety managers in all industries should become familiar with the standard.

2019 top standards- Global Standards

ISO 45001 safety and health management system standard

ANSI/ASSP/ISO 45001— 2018 Occupational Health and Safety Management Systems – Requirements with Guidance for Use

January 3, 2019

Experts say 45001 is not easy to apprehend when read as a normal book, especially if you are not familiar with the ISO framework of 9001 and 18001. You have to realize the interconnections between specific clauses. Experts advise finding a good training course to help realize the standard’s full potential. You may also want to consider employing consultancy services to assist.

NFPA-70E®-2018 Standard for Electrical Safety for Employee Workplaces®

2019 top standards- NFPA Voluntary Standards

NFPA 70E electrical safety standard

NFPA-70E®-2018 Standard for Electrical Safety for Employee Workplaces®

January 3, 2019

NFPA 70E® Standard for Electrical Safety in the Workplace® provides requirements for establishing a workplace that is safe from unacceptable risks associated with using electricity while working. Safety processes, policies, procedures and program controls reduce the risks associated with using electricity to an acceptable level.

Fall protection — General Requirements (1926.501)

2019 top standards- OSHA Most Frequently Violated Standards

OSHA fall protection standard

Fall protection — General Requirements (1926.501)

January 3, 2019

OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in long shoring operations. In addition, OSHA requires that fall protection be provided when working over dangerous equipment and machinery, regardless of the fall distance.

Give your hearing the protection it needs

Attenuation attention

Eric Henzie

January 3, 2019

This article aims to recap basic information about hearing protection and how to help prevent long-term hearing loss. This is an important topic that should be reinforced in order to ensure workers are provided a comprehensive and efficient hearing protection products and programs.

Enormous gaps IDd in the recognition of occupational cancers in Europe

January 2, 2019

A new report by EUROGIP presents an analysis of the extent to which occupational cancers are recognised in nine European countries: Austria, Belgium, Denmark, Finland, France, Germany, Italy, Sweden and Switzerland. It also looks at the schemes for identifying occupational cancers, especially via monitoring the health of people exposed to carcinogens in the course of their working careers.

2019 top standards- OSHA Most Frequently Violated Standards

OSHA machine guarding standard

OSHA’s machine guarding standard was the ninth-most-frequently cited agency standard in FY 2018.

January 1, 2019

Machine safeguarding is the best way to prevent amputations. Guards provide physical barriers to hazardous areas. They should be secure and strong, and workers should not be able to by-pass, remove or tamper. Guards should not obstruct the operator’s view or prevent others from working.

You have the right to remain safe at work

January 1, 2019

With a new year dawning, it’s a good time to review the rights and requirements of the Occupational Safety and Health Act of 1970 (OSH Act), which was passed to prevent workers from being killed or otherwise harmed at work. The OSH Act gives workers the right to safe and healthful working conditions. In order to ensure their protection from job hazards, workers can: