Articles Tagged with ''OSHA standards''

OSHA requires employers to ensure the safety of all employees in the work environment. Eye and face protection must be provided whenever necessary to protect against chemical, environmental, radiological or mechanical irritants and hazards.

In the United States, workers required to wear respiratory protection must pass an annual respirator fit test. Fit tests help companies ensure worker safety by verifying a respirator can provide an OSHA-mandated and standardized level of protection.

The standard applies to all general industry places of employment, including agricultural services, manufacturing, transportation and utilities, wholesale trade, food stores, hotels and other lodging, health services, museums, botanical gardens and zoos.

The standard applies to all occupational exposures to respirable crystalline silica, except where employee exposure will remain below 25 μg/m3 as an 8-hour TWA under any foreseeable conditions and those occurring during agricultural operations covered under 29 CFR part 1928 and and exposures that result from the processing of sorptive clays.

Any entity doing construction work, such as building a new structure or upgrading an old one, must follow the construction confined space rule. Because the new rule applies to all employers who perform construction activities in a confined space, safety managers in all industries should become familiar with the standard.

Few employees may ever take notice of a freshly cleaned, well-maintained floor. Unfortunately, too few also tend to notice uneven surfaces that cause trips or spilled materials that can make floors slippery. That’s one of the reasons why it’s up to employers to make sure that these types of hazards are eliminated.

Stories related to construction industry safety ranged this year from hazard-specific (spray foam insulation, concrete drilling) to regulations (silica, crane operator certification) to developments that affect construction safety in a more general way, like the workforce shortage or the legalization of marijuana in many states. Here’s a look back at 2018 articles:

OSHA's efforts to revise and update the existing general industry walking-working surfaces standards have been underway since 1973. The final rule incorporates advances in technology, industry best practices, and national consensus standards to provide effective and cost-efficient worker protection.

Providing clean, safe walkways in public facilities is essential for preventing costly slip, trip and fall (ST&F) accidents. Falls on the same level were the second leading cause of all workplace injuries in 2013 at 16.4 percent of all workplace injuries and resulted in $10.1 billion in direct costs (Liberty Mutual, 2016).

OSHA’s General Industry’s standard for the Control of Hazardous Energy (LOTO) 29 CFR 1910.147 addresses one of the most important safety regulations to protect workers from injury: lockout/tagout. The standard requires workers to isolate energy during servicing and maintenance of machines and equipment to prevent the unexpected startup or release of energy.